Panasonic DP-8032 - Page 301

301
DP-8032/8025
2008Ver. 1.2
(1) Cut off the Paper Holder at the joint into two parts
with a nipper as illustrated.
Note:
A. Cut the ends neatly.
B. Dispose of the bottom part of the Paper Holder.
(2) Install the Paper Holder to the Paper Holder Base
which is already installed on the center of the Jam
Cover.
Note:
A. Make sure that the rib side of the Paper Holder is
facing the exit cover.
B. When installing, swing the bottom part of the Paper
Holder to the left as illustrated.
(3) Swing the Paper Holder to the left.
(4) Install the Inner Tray in the direction of the arrow
holding up the Paper Holder.
(5) Plug the AC Power Cord, and turn the Main Power
Switch on the Back and the Power Switch on the
Left Side of the machine to the ON position.
(6) Reconnect the Telephone Line / LAN Cable if
disconnected.
A
B