303
DP-8032/8025
2008Ver. 1.2
(1) Cut off the protective tabs on the Left Side Cover
and the Left Rear Cover (Upper Tab Only).
(2) Remove 2 Shoulder Silver Screws from the upper
side of the Left Side Cover.
(3) Install the Outer Cover Assembly, and secure the 4
Screws (M3 x 10).
(4) Install the Exit Tray Assembly onto the Outer Cover
Assembly.
(5) Plug the AC Power Cord, and turn the Main Power
Switch on the Back and the Power Switch on the
Left Side of the machine to the ON position.
(6) Reconnect the Telephone Line / LAN Cable if
disconnected.
To Next Page
Loading...
