313
DP-8032/8025
2008Ver. 1.2
(12) Connect the Key Counter Socket Harness into the
KC Harness.
(13) Install the Key Counter Socket.
(14) Secure the Key Counter Socket with 2 Screws (M3
x 35).
Note:
If you are not installing the Key Counter at this time,
cover the opening with the Key Counter Cover and
secure it with 2 Screws.
(15) Plug the AC Power Cord, and turn the Main Power
Switch on the Back and the Power Switch on the
Left Side of the machine to the ON position.
(16) Reconnect the Telephone Line / LAN Cable if
disconnected.
To Next Page
Loading...
