316
DP-8032/8025
2008Ver.1.2
(9) Install the EMI Bracket.
(10) Secure the EMI Bracket with 2 Screws (XTB3+6J).
(11) Connect the CCD Harness to the CCD PC Board.
(12) Insert the CCD Harness into the Harness Clamp.
(13) Secure the Harness Clamp with 1 Screw (XTB3+6J).
(14) Remove 2 Shoulder Silver Screws (Upper) and 2
Silver Screws (Lower).
(15) Remove the Left Cover.
(16) Remove 4 Screws.
(17) Open the Rear Cover.
To Next Page
Loading...
