318
DP-8032/8025
2008Ver.1.2
(30) Remove 2 Screws.
(31) Remove the NFL PC Board.
(32) Route the HT1 Harness to the lower section of the
frame as illustrated.
(33) Connect the RLB Harness to the NFL PC Board
(CN134).
(34) Reinstall the NFL PC Board.
(35) Connect the PTC-AC Harness 3 to the Heater.
(36) Insert the PTC-AC Harness 3 to 3 Harness Clamps.
To Next Page
Loading...
