Panasonic DP-8032 - Page 362

362
DP-8032/8025
2008Ver. 1.2
(59) Disconnect the Harness.
(60) Release the Harness from the Clamp.
(61) Remove 4 Screws (2632).
(62) Remove 2 Screws (2521).
(63) Remove the Slide Base Bracket (3003).
(64) Remove 2 Screws (2521).
(65) Remove the Set Motor (2931) Assembly.
(66) Disconnect 2 Harnesses.
(67) Release the Harness from the Clamp.