Local Firmware Update Tool (Parallel/USB Port)
Page 9
5
Specify the Firmware Code File by the
following methods.
Select a Parent File Folder (Complete Set)
--> Step 5.1
If the archive file is already extracted into
the local \Data folder, you can select the
Parent File Folder directly here.
It is chosen as a set when the update of
multiple firmware code files is necessary.
or
Select an Independent File
--> Step 5.2
If the archive file is already extracted into
the local \Data folder, you can select an
independent file here.
When updating multiple firmware files, you
must repeat the file selection operation.
5.1
5.1a
Select a Parent File Folder (Complete Set)
Select "Select a Parent File Folder (Complete
Set)" and click [Browse...] button.
5.1b
Select the Parent File Folder (For Example:
DP-2310_3010_PU_030327) and Click [OK].
To Next Page
Loading...
