61
DP-8032/8025
2008Ver. 1.2
(10) Disconnect the 3 Harnesses on the Terminals of
Fuser Unit.
Note:
When reinstalling, make sure that the 3 Harnesses
are connected correctly as illustrated.
(11) Disconnect 2 Harnesses.
(12) Remove 4 Screws (4N).
(13) Remove the Fuser Unit.
(14) Remove 4 Screws (6P).
(15) Remove the Dual-Path Exit Guide.
(16) Clean the Feed Roller (1510) with a soft cloth,
saturated with isopropyl alcohol.
To Next Page
Loading...
