Panasonic DP-8032 - Page 68

68
DP-8032/8025
2008Ver. 1.2
(5) Remove 2 Silver Screws (B1).
(6) Remove the Lower Rear Cover (506).
(7) Remove 1 Screw (24).
(8) Remove 5 Fly Wheels (922).
(9) Remove the Process Unit. (Refer to 2.2.4.)
(10) Remove 3 Screws (21).
(11) Remove the HVPS Unit.
(12) Disconnect the MT Harness (1926) on the Main
Motor (CN1 and CN2).
(13) Remove 5 Screws (4N).
(14) Remove the Main Motor (907).
(15) Disconnect the Connector on each of the 3 Clutches.
(16) Remove 3 Snap Rings (S9).
(17) Remove 3 Clutches (969, 1105 x 2).
(18) Release The Harnesses from 4 Harness Clamps.