Caution for the standard input tray
R Do not drop the standard input tray.
R Hold the standard input tray with both hands
when removing or installing. The standard input
tray weighs approximately 3.6 kg when fully
loaded with recording paper.
4.1.2 Multi-purpose tray
R The unit is set for printing A4-size plain paper by
default.
– To use other paper sizes, change the
recording paper size setting (feature #381 on
page 75).
– To use other paper types, change the
recording paper type setting (feature #384 on
page 76).
R To print from the multi-purpose tray, change the
paper tray setting beforehand.
– Select #2 for the printer properties when
printing with the computer.
– Set the copy input tray setting to “#2” (feature
#460 on page 83) when making a copy.
Important:
R To print on thick paper, label, envelope or Japan
postcard:
– Be sure to open the rear cover before starting
and print one sheet at a time. The recording
paper will be printed out from the rear side.
Therefore, if you print with the cover closed,
the paper may jam inside the unit.
– Be sure to close the rear cover after printing.
32
4. Recording Paper and Documents
To Next Page
Loading...
