Panasonic DP-MC210 - Setting Scan to FTP Information (LAN)

9. Programmable Features
72
Setting the information for
scan to FTP (LAN connection
only)
L This feature can be
programmed only through
the web browser interface.
When you send scanned files to an FTP server, you can register FTP
destinations (up to 6 destinations) to the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Advance Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 60). i [OK]
4. Select the [Scan Feature] tab.
5. Click [Edit] next to [FTP Server].
6. Click [Edit] next to the desired FTP server.
7. Enter the server name, IP address, folder directory, etc. i [Submit]
8. Close the web browser.
Note:
L If you do not enter a folder directory in step 7, the scanned image will be
saved in the root folder.
Feature/Code Selection