8.3 Setting Function for FP Memory Loader
8.3.1 Setting Function for FP Memory Loader
The following two functions of the FP memory loader (AFP8670/AFP8671) (*) can be set.
Limited distribution function
(Programs can be downloaded only to the units which the same password has been set.)
When downloading a program from the memory loader, the program can be downloaded only when the
program stored in the memory loader matches the password set for the PLC with this function enabled.
Upload protection setting function
If this function is valid, the PLC will be in the upload protection state by downloading a program to the
PLC from the FP memory loader.
To Next Page
Loading...
