5.2 Expansion Method
5.2.1 How to Connect With FP-X Expansion Unit
The expansion unit is connected to the control unit with an exclusive expansion cable.
- The expansion cable (AFPX-EC08) is packaged with the expansion unit and expansion FP0 adapter.
The expansion cables (AFPX-EC30, AFPX-EC80) are sold separately.
How to connect
The procedure is as follows.
○
1
Remove the expansion cover.
○
2
Fit the expansion cable into the connectors of the control unit and expansion unit.
○
3
Fold the expansion cable to touch the units each other.
○
4
As for the expansion unit at the last position, turn on the terminator setting switch.
○
5
Install the expansion cover.
Note:
- The total length of the expansion cables should be within 160 cm.
- Keep the expansion cables away from the devices and wirings generating noises as much as possible.
To Next Page
Loading...
