Panasonic FP-X0 L30R - Communicaton Port Type

6.2 Communicaton Port Type
6.2.1 Tool Port
This connector is used to connect a programming tool.
A commercial mini-DIN 5-pin connector is used for the tool port on the control unit.
Pin No.
Signal name
Abbreviation
Signal direction
1 Signal Ground SG -
2
Send Data
SD
Unit
→
External device
3 Receive Data RD Unit ← External device
4
(Not used)
-
-
5 +5 V +5 V Unit → External device
6.2.2 COM Port (RS485 Port: For L40MR and L60MR only)
Only L40MR and L60MR has a COM port.
Terminal
Name
＋
Transmission line (+)
－ Transmission line (-)
E
Terminal unit
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com