Panasonic FP-X0 L30R - IO Allocation

4.1 I/O Allocation
Allocation of I/O Numbers
Unit type
I/O number
Input
Output
Control unit
X0 to X9F (WX0 to WX9) Y0 to Y9F (WY0 to WY9)
Expansion 1st unit
X300 to X39F (WX30 to WX39) Y300 to Y39F (WY30 to WY39)
Expansion 2nd unit
X400 to X49F (WX40 to WX49)
Y400 to Y49F (WY40 to WY49)
Expansion 3rd unit
X500 to X59F (WX50 to WX59) Y500 to Y59F (WY50 to WY59)
Note) The ranges of the I/O numbers which are actually used differ depending on the cassettes and units.
Regarding I/O numbers
• Specifying X and Y numbers
On the FP-X and the FP0, the same numbers are used for input and output.
• Expression of numbers for input/output relays
Input relay “X” and output relay “Y” are expressed as a combination of decimal and hexadecimal
numbers as shown below.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com