3.1 FP-X Expansion Units
3.1.1 Parts Names and Functions
FP-X E16 exapansion I/O unit
FP-X E30 exapansion I/O unit
○
1
Input and Output indicator LEDs
Indicates the on/off status of the input and output.
○
2
Input terminal block
This is the input terminal. A solderless terminal for M3 can be used.
○
3
Output terminal block
This is the output terminal. A solderless terminal for M3 can be used.
○
4
Expansion connector
Connects with the control unit, expansion unit and the expansion FP0 adapter using the exclusive
expansion cable.
○
5
Expansion cover
It is used after the expansion cable has been fitted.
○
6
DIN rail attachment lever
This lever enables the expansion unit to attach to a DIN rail at a touch.
○
7
Terminator setting DIP switch
All switches should be turned on for the expansion unit installed at the last position .
To Next Page
Loading...
