Panasonic FP-X0 L30R - Page 228

WR908 FP-X0
Address
Name
Description
R9080
MEWNET-W0
PC(PLC) link 1
transmission
assurance
relay
Unit
No.1
Turns on when Unit No. 1 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R9081
Unit
No.2
Turns on when Unit No. 2 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R9082
Unit
No.3
Turns on when Unit No. 3 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R9083
Unit
No.4
Turns on when Unit No. 4 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R9084
Unit
No.5
Turns on when Unit No. 5 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R9085
Unit
No.6
Turns on when Unit No. 6 is communicating properly in PLC
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PLC link mode.
R9086
Unit
No.7
Turns on when Unit No. 7 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R9087
Unit
No.8
Turns on when Unit No. 8 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R9088
Unit
No.9
Turns on when Unit No. 9 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R9089
Unit
No.10
Turns on when Unit No. 10 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R908A
Unit
No.11
Turns on when Unit No. 11 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R908B
Unit
No.12
Turns on when Unit No. 12 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R908C
Unit
No.13
Turns on when Unit No. 13 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R908D
Unit
No.14
Turns on when Unit No. 14 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R908E
Unit
No.15
Turns on when Unit No. 15 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
R908F
Unit
No.16
Turns on when Unit No. 16 is communicating properly in
PC(PLC) link mode. Turns off when operation is stopped,
when an error occurs, or when not in the PC(PLC) link mode.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com