- 105 -
2 (Only when you would like to change the settings)
Touch [SET] to select the item to change.
* Setting is not possible when the operation in Step 1 is performed while thumbnails in the Stop
Motion Animation Assist Mode are displayed. (l 106)
3 (When [DATE SETUP] is selected)
Touch the playback date.
(When [SLIDES INTERVAL] is selected)
Touch the interval of playback for the slide show.
(When [EFFECT SETUP] is selected)
Touch the desired effect.
≥ Touch [ENTER].
≥ When [EFFECT SETUP] is changed, [MUSIC SELECT] will be
set the same as [EFFECT SETUP]. (To set [EFFECT SETUP]
and [MUSIC SELECT] to different settings, change
[MUSIC SELECT] after setting [EFFECT SETUP].)
≥ [SLIDES INTERVAL] cannot be set, when [EFFECT SETUP] is set.
(When [MUSIC SELECT] is selected)
Touch the desired sound.
≥ Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥ Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4 Touch [START].
5 Select the playback operation. (l 29)
≥ When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or
[EXIT] is displayed. Touch the desired item.
[DATE SETUP]: Select the date to be played back.
[SLIDES INTERVAL]
*
: Select the interval between still pictures at playback.
[EFFECT SETUP]
*
: Select the effect for playback.
[MUSIC SELECT]: Select the music to be played on playback.
[SHORT]: Approx. 1 second
[NORMAL]: Approx. 5 seconds
[LONG]: Approx. 15 seconds
To Next Page
Loading...
