Panasonic HC-W580M - Connecting with an HDMI Mini Cable

- 118 -
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
Example of images with a 16:9 aspect ratio
on a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen (operation
icon etc.) can be displayed/not displayed on the
TV.
* This setting is only available in Motion Picture
Recording Mode or Still Picture Recording
Mode.
Connecting with an HDMI mini cable
Select the desired method of HDMI output.
≥ [AUTO] determines the output resolution automatically based on information from the connected
TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p],
[1080i] or [576p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ Images may not be displayed on the television for several seconds in some cases, such as when
changing between scenes.
: [SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
MENU
: [SETUP] # [EXT. DISPLAY] #
desired setting
[SIMPLE]*: Information partially
displayed
[DETAIL]: Detailed information
displayed
[OFF]: Not displayed
MENU
Refer to the following support site for information about Panasonic TVs with an SD card
slot for playing back your pictures.
http://panasonic.net/
≥ It may not be possible to play back scenes on the TV depending on the [REC MODE].
≥ For details on how to play back, please read the operating instructions for the TV.
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p]
MENU