- 85 -
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥ This setting is retained when you change between Motion Picture Recording Mode and
Still Picture Recording Mode.
≥ Switch to Manual Mode. (l 63)
1 Select the menu.
2 Touch the desired setting items.
3 Touch / to adjust settings.
4 Touch [ENTER].
≥ Touch [EXIT] to complete the settings.
≥ appears on the screen.
The higher the number of pixels, the higher the clarity of the picture when printing.
∫ Picture size and Maximum zoom ratio in Still Picture Recording
Mode
Aspect ratio will change depending on the picture size.
[PICTURE ADJUST]
: [RECORD SETUP] # [PICTURE ADJUST]
[SHARPNESS]: Sharpness of the edge
[COLOUR]: Depth of the colour of the image
[EXPOSURE]: Brightness of the image
[WB ADJUST]: Picture colour balance
[PICTURE SIZE]
: [PICTURE] # [PICTURE SIZE] # desired setting
[16:9]: Aspect ratio of high-definition television, etc.
[4:3]: Aspect ratio of 4:3 television
[3:2]: Aspect ratio of conventional film camera or prints (such as L-size print)
MENU
To Next Page
Loading...
