- 114 -
Advanced (Playback)
Relay scene combining [W580M]
You can combine the relayed scene (l 80) in the built-in memory and the continued scene in
the SD card to be one into the SD card.
Relay-recorded scene Relay scene combining
A Built-in memory
B SD card
C Range of Relay Recording
≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch
the play mode select icon. Then, select the AVCHD scene. (l 28)
1 Insert the SD card that was used for Relay Recording.
2 Select the menu.
: [EDIT SCENE] # [RELAY SCENE COMBINE]
3 When the confirmation message appears, touch [YES].
≥ Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are not
deleted.)
4 Touch [EXIT] when the relay scene combining complete message is
displayed.
≥ The thumbnail view of the SD card is indicated.
≥ Relay Recording information will be deleted when the relay scenes are combined, and Relay
Recording will be possible again.
≥ When the relayed scenes in the built-in memory or SD card are deleted, combining of the relayed
scenes will not be possible.
MENU
To Next Page
Loading...
