- 174 -
Setting up a direct connection to a smartphone
Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (l 180)
≥ The default setting is [OFF].
Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi
environment.
≥ When [Direct Connection Password] is set to [OFF]
j Proceed to the following section, “When [Direct Connection Password] is set to [OFF]” in
“Using [Remote Ctrl] with a direct connection”. (l 142)
≥ When [Direct Connection Password] is set to [ON]
If your smartphone is compatible with WPS, refer to “[Easy Connection (WPS)]”. If not, refer to
“Connecting with QR code”.
j Proceed to the following [Easy Connection (WPS)]
j Proceed to the “Connecting with QR code” (l 175)
j Proceed to the “Connecting by entering an SSID and Password” (l 175)
When the Wi-Fi connection is complete, refer to “When [Direct Connection Password] is set to
[ON]” in “Using [Remote Ctrl] with a direct connection”. (l 143)
1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2 Touch [Direct Connection].
3 Touch [Change connection type].
4 Touch [Easy Connection (WPS)].
5 Turn on the Wi-Fi function in the smartphone’s setup menu.
6 Set the smartphone to WPS Mode.
[Easy Connection (WPS)]
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
To Next Page
Loading...
