- 45 -
You can minimise the loss of gradations in bright areas and dark areas when, for example,
the contrast between the background and the subject is large.
≥ This unit will be set to Intelligent Auto Mode if you turn it off and on.
≥ This function is not available in the following cases:
j During motion picture recording
j When the Wireless Twin/Multi-Camera function is in use
≥ [REC MODE] is set to [1080/28M] in the following cases:
j When [REC FORMAT] is set to [MP4/iFrame] and [REC MODE] is set to [720] or [iFrame]
≥ The following settings are cancelled:
j [FACE FRAMING]
j Auto Slow Shutter
j Backlight Compensation
j Intelligent Contrast Control
j Night Mode
j Digital Cinema Colour
j [PICTURE ADJUST]
j [HYBRID O.I.S.]
j Twin Camera
≥ You cannot record still pictures.
≥ The shutter speed and brightness (iris/gain) are adjusted automatically. If you set them manually
in advance, the settings will not be maintained.
≥ Depending on recording conditions, the screen may flicker or you may see horizontal bars in the
image.
≥ If you record a moving subject or move this unit quickly while recording, the image may be
distorted.
∫ To change the level of image contrast correction
[HDR EFFECT] allows you to change the contrast correction level in HDR Movie Mode.
≥ Change the Recording Mode to . (l 53)
1 Select the menu.
2 Touch [ENTER].
≥ Touch [EXIT] to complete the settings.
Advanced (Recording)
HDR Movie Mode [W580] [W580M]
HDR button
You can switch from Recording mode to HDR Movie Mode
by pressing this button.
≥ Press it once more to switch from HDR Movie Mode to
Intelligent Auto Mode.
≥ It is also possible to switch to HDR Movie Mode by touching
the Recording Mode button icon. (l 53)
: [RECORD SETUP] # [HDR EFFECT] # desired setting
: Sets the correction level to high.
: Sets the correction level to low.
MENU
To Next Page
Loading...
