Panasonic HC-W580M - Page 36

- 36 -
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this
sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 224)
≥ Refer to page 86 when changing the shutter sound setting.
You can change the operation icons (l 72) to display in the Touch Menu.
Register 3 favourite operation icons.
≥ /
The default settings are, (Fade), (PRE-REC) and (Level Shot Function) for Motion
Picture Recording Mode, and (Self-timer), (Backlight Compensation) and (Tele
Macro) for Still Picture Recording Mode.
≥
The default settings are, (Fade), (PRE-REC) and (Backlight Compensation) for
Motion Picture Recording Mode, and (Self-timer), (Backlight Compensation) and
(Tele Macro) for Still Picture Recording Mode.
1 Select the menu.
2 Touch the operation icon you would like to change to cancel the setting.
3 Touch the operation icon to be set.
≥ Name of the function is displayed by touching and holding on the operation icon.
≥ To cancel, touch the operation icon again.
4 Touch [ENTER].
[ALERT SOUND]
: [SETUP] # [ALERT SOUND] # desired setting
(Volume low)/ (Volume high)/[OFF]
[SELECT OPERATION ICONS]
: [SETUP] # [SELECT OPERATION ICONS]
MENU
W580
W580M
V380
MENU