- 93 -
3 Touch the desired effect.
≥ The scenes matching the effect will be extracted and displayed in the thumbnail view.
≥ Effects such as fade, slow-motion, still (pause), or digest playback are inserted.
≥ The date at playback is the date that was last recorded in an extracted scene.
≥ To change the settings, refer to page 95.
4 Touch in the thumbnail view.
5 Select the playback operation. (l 29)
≥ When the playback is finished or stopped, the screen to select [REPLAY], [SAVE] (l 98),
[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.
≥ Skip Playback, Slow-motion Playback, Frame-by-frame Playback and Direct Playback are not
possible.
[POP]: Recommended for party scene.
[NATURAL]: Recommended for scenery.
[CLASSICAL]: Recommended for slow moving scene.
[DYNAMIC]: Recommended for fast moving scene such as sports scene.
[CUSTOM]: Set the combination of the effect and the music. (l 94)
≥ Highlight Playback is not available for the following scenes :
s iFrame scenes
s Scenes recorded with Creative Control Mode (l 56)
s Scenes recorded with HDR Movie Mode (l 45, 61) ( / )
s Scenes recorded as Backup for Twin Camera
s Scenes saved as Highlight Playback
s Scenes saved as manually-edited scenes (l 99)
s Scenes that were converted to MP4 scenes and copied (with the MP4 conversion
function) (l 113) ( / )
s Scenes that were converted to MP4 scenes and copied (with the MP4 conversion
function or recording format conversion function) (l 113, 121) ( )
W580
W580M