Panasonic KX-NCP1000 - Fixed Numbering

Feature
Default
Pattern 1
(with )
Pattern 2
(without )
KX-NCP500
KX-NCP1000
KX-TDE100
KX-TDE200
KX-TDE600
Extension Feature Clear
*1
790 790 790
Extension Personal Identification Number (PIN) set/
cancel
*1
799 799 799
Dial Information (CTI) None None None
Other PBX Extension Number (TIE) 01–16 None None None
Quick Dialing 1–80
*3
None None None
*1
SIP extension users can
use these feature numbers. If these feature numbers do not work properly with the KX-HGT100, ensure
that the firmware of the KX-HGT100 and the MPR software file version of the PBX are updated to their latest versions.
*2
These settings are unrelated to PBX feature numbers and are set directly via the telephone. If the number set to the telephone
is also used as a PBX feature number, the number functions as the telephone's feature number, and not as a PBX feature
number. See 4.6.1 Registering IP Telephones in the IP Networking Guide for programming details.
*3
It is possible to register Quick Dialing numbers that overlap with other registered numbers. This is used for the Automatic
Rerouting of VoIP Calls To Public CO Line feature.
2. Flexible Numbering (available while a busy, DND, or ringback tone is heard)
Feature numbers which are available while a busy, DND, or ringback tone is heard can be customized for
easy use. The numbers should be one digit (0-9, "
", or "#") and must not conflict. For a list of the default
settings, refer to the following table:
[Flexible Numbering Table (available while a busy, DND, or ringback tone is heard)]
Feature Default
Call Waiting/DND Override
*1
1 or 2
*2
Executive Busy Override 3
Message Waiting set
*1
4
Call Monitor 5
Automatic Callback Busy 6
Alternate Calling—Ring/Voice
*1
SIP extensions cannot perform DND Override or Message Waiting but can be the recipient of them.
*2
To use Call Waiting/DND Override, both "1" and "2" are available by default.
3. Fixed Numbering (available while dialing or talking)
Features which are available while dialing or talking have fixed numbers, as shown in the following table:
[Fixed Numbering Table (available while dialing or talking)]
Feature Fixed Numbering
Pulse to Tone Conversion
124 Feature Manual Document Version 2013-05
6.1.4 Flexible Numbering/Fixed Numbering