Panasonic KX-NCP1000 - Display Information

PT Programming Manual References
[209] DISA Delayed Answer Time
[210] DISA CO-to-CO Line Call Prolong Time
[211] DISA Intercept Time
[475] DISA Silence Detection
[476] DISA Continuous Signal Detection
[477] DISA Cyclic Signal Detection
[604] Extension Intercept Destination
[730] Outgoing Message (OGM) Floating Extension Number
[731] Outgoing Message (OGM) Name
[732] DISA Security Mode
Feature Manual References
3.1.23 COS (Class of Service)
4.1.10 DND (Do Not Disturb)
6.1.6 FWD (Call Forwarding)
9.1.11 Intercept Routing
9.1.12 Intercept Routing—No Destination
Operating Manual References
1.3.19 DISA (Direct Inward System Access)
1.3.74 Walking COS
4.1.9 Display Information
Description
A display proprietary telephone (PT) can relay the following information to the user while making or receiving
calls:
Display Item Display Example Condition
The extension number and name of the
calling or called extension, or Incoming Call
Distribution (ICD) Group
123: Tom Smith
–
Status of the called extension
123: Busy
–
The number and name of the optional device
D02: 1st Door
–
The telephone number dialed
1234567890
–
The received call information
a. Caller’s name
b. Caller’s number
c. CO line number/name
d. Original Destination, if the call is
forwarded
e. DID name
ABC Company
12345678
Line 001: Sales
®102:Mike
Panasonic*
The first line message can
be either (a), (c), or (e) at
each extension through
system programming.
These
can be displayed
in
turn by pressing the
TRANSFER button or
DISP Soft button during a
call.
Document Version 2013-05 Feature Manual 95
4.1.9 Display Information