Panasonic KX-NCP1000 - CO Line Access

PC Programming Manual References
3.33 [1-1] Slot—Port Property - PRI Port
→CO Setting—
Subscriber Number
→Supplementary Service— COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
CCBS, E911
3.36 [1-1] Slot—Port Property - T1 Port— Subscriber Number
4.9 [2-6-1] Numbering Plan—Main—Features
→ COLR Set / Cancel
→ CLIR Set / Cancel
→ Switch CLIP of CO Line / Extension
4.18 [2-9] System Options—Option 4
→ Send CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)
→ Send CLIP of CO Caller—when call is forwarded to CO
4.18 [2-9] System Options—Option 7
→ CLIP Modification (Outgoing)—"0" Delete from CLIP
→ CLIP Modification (Outgoing)—"00" Delete from CLIP
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Main— CLIP on G-DN Button
6.1 [4-1-1] Wired Extension—Extension Settings
→Main— Extension Number
→ISDN CLIP— CLIP ID
→ISDN CLIP— CLIP on Extension/CO
→ISDN CLIP— CLIR
→ISDN CLIP— COLR
6.5 [4-1-4] Wired Extension—Flexible Button— Type
6.10 [4-2-1] Portable Station—Extension Settings
→ISDN CLIP— CLIP ID
→ISDN CLIP— CLIP on Extension/CO
→ISDN CLIP— CLIR
→ISDN CLIP— COLR
6.13 [4-2-3] Portable Station—Flexible Button— Type
6.18 [4-3] DSS Console— Type
PT Programming Manual References
[003] Extension Number
[606] CLIP Number
Feature Manual References
6.1.3 Flexible Buttons
Operating Manual References
1.3.53 Private Network Features—CLIP (Calling Line Identification Presentation)
1.3.54 Private Network Features—CLIR (Calling Line Identification Restriction)
1.3.56 Private Network Features—COLR (Connected Line Identification Restriction)
3.1.17 CO Line Access
Description
There are three methods of accessing a CO line.
Document Version 2013-05 Feature Manual 61
3.1.17 CO Line Access