Panasonic KX-NCP1000 - Page 180

[Programming Example: Internal Call Block]
Caller
COS 1
COS 2
COS 3
COS 1
Block
COS 2
Block
Block
COS...
Block
Block
COS 3
Block
Called Party
In this example:
a. COS 1 can make calls to all extensions.
b. COS 2 can make calls to COS 1 only. (COS 2 cannot make calls to COS 2.)
c. COS 3 can make calls to COS 3 only.
COS 1
Extn. 100 Extn. 101
COS 2
Extn. 102 Extn. 103
COS 3
Extn. 104 Extn. 105
Extn. 106
Conditions
• Internal Call Block also
prohibits certain features, such as Walking Extension and Walking COS, from being
performed between certain extensions.
• Any extension can make an Operator Call regardless of the Internal Call Block setting of its COS. (®
12.1.5 Operator Features)
• Because each doorphone port is assigned a COS, the Internal Call Block feature can restrict certain
extensions from calling certain doorphones. (® 4.1.12 Doorphone Call)
PC Programming Manual References
4.14 [2-7-3] Class of Service—Internal Call Block—
COS Number of the Extension Which Receive the Call
from Other Extension 1–64
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Main— COS
6.1 [4-1-1] Wired Extension—Extension Settings—Main— COS
6.10 [4-2-1] Portable Station—Extension Settings—Main— COS
7.1 [5-1] Doorphone— COS
7.6 [5-4] External Relay— COS Number
180 Feature Manual Document Version 2013-05
9.1.14 Internal Call Block