Panasonic KX-NCP1000 - Page 191

[Error Example]
ERR #100 (*10001)
(1)
(2)
[Explanation]
Number in the
Example
Item Description
(1) Error Code Shows three-digit error code.
(2) Sub Code Shows six-digit sub code (WXYYZZ).
W: Shelf type
(Physical shelf: blank, Virtual shelf: *)
X: Shelf number (1–4)
YY: Slot number (00–11)
ZZ: Physical port number (01–16)
Conditions
• System Alarm Button
Any flexible button can be customized as the System Alarm button.
• If an extension allowed
to utilize this feature uses PC Console or PC Phone, the alarm information will be
displayed on the PC, and can be sent to the preprogrammed destination via PC Console or PC Phone. PC
Console and PC Phone use e-mail to send the information.
• The alarm information will be logged on the Station Message Detail Recording (SMDR), if enabled through
system programming.
• The PBX can be automatically diagnosed at a preprogrammed time everyday.
Installation Manual References
KX-NCP500/KX-NCP1000
5.1.5 Troubleshooting by Error Log
KX-TDE100/KX-TDE200
5.1.5 Troubleshooting by Error Log
KX-TDE600
5.1.5 Troubleshooting by Error Log
PC Programming Manual References
2.6.7 Utility—Message File Transfer PBX to PC
6.5 [4-1-4] Wired Extension—Flexible Button—
Type
6.13 [4-2-3] Portable Station—Flexible Button— Type
6.18 [4-3] DSS Console— Type
13.1 [11-1] Main
Document Version 2013-05 Feature Manual 191
10.1.4 Local Alarm Information