Panasonic KX-NCP1000 - Page 340

– Tenant 2: Entries 51 to 100
– Tenant 3: Entries 101 to 150
:
– Tenant 20: Entries 951 to 1000
If "Same as System Setting" is selected, then all 1000 entries in the table will be applied to that
tenant’s outgoing calls. All 1000 entries in the table are applied to tenants 21 to 32 when ARS is enabled,
regardless of the tenant’s ARS Mode.
By dividing tenants, specific ARS settings can be applied to specific tenants according to the requirements
of each tenant.
The following example illustrates how the ARS Leading Number Table is applied to tenants:
Tenant No. ARS Mode Applied ARS Entries
1 On for Local Access Operation Entries 1 to 50
2 Off Not applied
3 Same as System Setting (System
Setting:
On)
Entries 1 to 1000
4
On for Local Access Operation Entries 151 to 200
5
Off Not applied
• The following features used by incoming call distribution (ICD) group are determined by the tenant number
assigned to them (® 9.1.1 ICD GROUP FEATURES):
– The Music on Hold heard by a caller while waiting in a queue.
– The Time Table used by the ICD group to determine the current time mode. An overflow destination
and Queuing Time Table can be assigned for each time mode.
PC Programming Manual References
4.4 [2-2] Operator & BGM
→ PBX Operator—Day, Lunch, Break, Night
→ BGM and Music on Hold—Music on Hold
4.6 [2-4] Week Table
4.8 [2-5] Holiday Table
4.13 [2-7-2] Class of Service—External Call Block
4.14 [2-7-3] Class of Service—Internal Call Block
5.6 [3-2] Extension Group
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Main— Tenant Number
6.1 [4-1-1] Wired Extension—Extension Settings—Main— Extension Group
6.10 [4-2-1] Portable Station—Extension Settings—Main— Extension Group
7.1 [5-1] Doorphone— Tenant Number
7.7 [5-5] External Sensor— Tenant No.
8.1 [6-1] System Speed Dial
8.6 [6-6] Tenant
Section 10 [8] ARS
10.6 [8-5] Carrier—Authorization Code for Tenant
12.2 [10-2] DIL Table & Port Settings—DIL— Tenant Number
12.3 [10-3] DID Table— Tenant Number
PT Programming Manual References
[001] System Speed Dialing Number
340 Feature Manual Document Version 2013-05
17.1.3 Tenant Service