Conditions
• The following information is logged.
KX-T7636/KX-T7633/
KX-T7630/KX-T7433
KX-NT500 series/KX-NT400/
KX-NT300 series (except KX-NT321)/
KX-DT300 series (except KX-DT321)/
KX-NT136
Telephone
Caller's Name
Information
Caller's Phone
Number
Date/Time call
received
Answered or
Not Answered
Confirmed or
Not Confirmed
KX-TD7695/KX-TD7685/
KX-TD7694/KX-TD7684/
KX-TD7690/KX-TD7680/
KX-TD7696/
KX-TCA185/KX-TCA285/KX-TCA385
KX-WT125/KX-WT126
6-line display PT
3-line display PT except
KX-T7633/KX-T7630/
KX-T7433
1-line or 2-line display PT
KX-NT321/KX-NT265/
KX-DT321
Wireless phone
(KX-TD7895/KX-T7885)
*
1
*
1
*1
If the caller’s name is not logged, the caller’s phone number is displayed.
If the caller’s name is logged, the caller’s phone number is not displayed.
• If the answering destination is not the original extension (e.g., Call Pickup or FWD—No Answer), the call
is
logged in the Incoming Call Logs of both the original and the answering destination. If a call is forwarded
to multiple extensions before being answered, the call is logged in the call logs of all the extensions it was
forwarded to. If a call is forwarded to an ICD group and is not answered, the call is not logged in the call
log for the ICD group.
• The following types of calls will be recorded as "Not Answered" in the incoming call log of the original
destination:
– Calls received when the extension is in use (the caller hears a busy tone).
– Calls rerouted using the Intercept Routing—Busy, FWD—All Calls, or FWD—Busy features.
If disabled through system programming, these types of calls will not leave a record in the incoming call
log.
It is also possible to specify through system programming if calls answered using Call Pickup are recorded
as "Not Answered" or "Answered" in the incoming call log of the original destination.
• Incoming Call Log for Calls to a PS
Each portable station (PS) also has an Incoming Call Log. When a call is directed to a PS, the call will be
logged in the call log of the PS even when:
a. The PS is out of range.
b. The PS is turned off.
c. The Cell Station (CS) is busy.
• Display Lock
The Incoming Call Log of an extension can be locked through personal programming (Directory and Call
Log Lock) to prevent other users from viewing its contents. In this case, the Outgoing Call Log display, the
Personal Speed Dialing number display and the SVM Log display are also locked, and the voice messages
in the user’s message box cannot be played back.
44 Feature Manual Document Version 2013-05
3.1.6 Call Log, Incoming
To Next Page
Loading...
