Panasonic KX-NS500 - Page 166

Using an EXtra Device Port
*1
SLTMaster DPT Slave DPT
4-conductor wiring cord
Connect pins "T", "R",
"D1" and "D2".
2-conductor wiring cord
Connect pins "T" and "R".
4-conductor wiring cord
Connect pins "T", "R",
"D1" and "D2".
To DLC2/DLC8/
DLC16 card
To DHLC4 card
(for connection of SLT)
To SLT
Slave DPTMaster DPT
Cable Maximum Distance
ø 0.4 mm: 30 m
ø 0.5 mm: 50 m
ø 0.6 mm: 60 m
CAT 5: 50 m
Back View of DPTs
To DLC2/DLC8/DLC16 card
To DHLC4 card
(for connection of SLT)
TO MAIN UNIT
/ PABX
TO MAIN UNIT
/ PABX
TO TEL
TO TEL
*1
Connecting with a SLT is not available for KX-DT321, KX-T7665 and KX-DT521
.
166 Installation Manual
4.8.3 Digital EXtra Device Port (Digital XDP) Connection