Panasonic KX-NS500 - Page 222

KX-NT300 series (except KX-NT321) and KX-NT500 series (except KX-NT511 and KX-NT551)
Select "Network".
ENTER
Select "Disable"
for DHCP setting.
ENTER
IP Address*
1
ENTER
To set the IP address of the IP-PT
To set the subnet mask address
To set the default gateway address
Select "Default Gateway".
ENTER
Default Gateway Address*
3
ENTER
ENTER
Subnet Mask Address*
2
ENTER
Select "Subnet Mask".
Select "IP Address".
To start programming
Press "SETUP" when it is displayed.
SETUP
Supply power to the IP-PT.
Select "PBX".
Return to the
Menu screen.
PBX IP Address
ENTER
ENTER
To enter the IP address of the PBX
Select "PBX IP
Address".
Select "Primary
PBX".
ENTER
ENTER
Continued on next page
*4
222 Installation Manual
5.7.1 Assigning IP Addressing Information