Panasonic KX-NS500 - Page 223

To enter the IP address of the Secondary PBX
*5
PBX IP Address
Select "Secondary PBX".
ENTER ENTER
Continued from previous page
To the VLAN settings
Press "STORE".
STORE
To end programming
To set VLAN parameters
OR
The IP-PT will reboot
and can then be
registered to the PBX.
Return to the
Menu screen.
Return to the
Menu screen.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range:
"0–255.0–255.0–255.0–255" (except "0.0.0.0" and "255.255.255.255")
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*4
For KX-NT300 series: Software version 2.00 or later only
For KX-NT500 series: Software version 1.00 or later only
*5
Optional for KX-NT300 series (Software version 2.00 or later only) and KX-NT500 series (Software version 1.00 or later only)
Note
The illustrations may differ from the buttons on your telephone.
Installation Manual 223
5.7.1 Assigning IP Addressing Information