IP Address*
1
Subnet Mask Address*
2
Default Gateway Address*
3
To set the IP address of the IP-PT
To set the subnet mask address
To set the default gateway address
To start programming
Supply power to the IP-PT.
Press PROGRAM
while "Searching" is displayed.
Select "Network". Press SP-PHONE. Select "DHCP (Disable)". Press SP-PHONE
twice.
Press SP-PHONE.
Select "Subnet Mask". Press SP-PHONE. Press SP-PHONE.
Select "Default GW". Press SP-PHONE. Press SP-PHONE.
Continued on next page
Press HOLD to return
to the Menu screen.
To enter the IP address of the PBX
Select "PBX IP
Address".
Press SP-PHONE.
Select "PBX". Press SP-PHONE.
Select "Primary
PBX".
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Select "Secondary
PBX".
Press SP-PHONE.
To enter the IP address of the Secondary PBX (if required)
PBX IP Address
PBX IP Address
To Next Page
Loading...
