Panasonic KX-NS500 - Page 225

Continued from previous page
To the VLAN settings
The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
To set VLAN parameters
OR
Press HOLD twice to return
to the Menu screen.
Press STORE.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range:
"0–255.0–255.0–255.0–255" (except "0.0.0.0" and "255.255.255.255")
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
Note
• For KX-NT511 Users
For details about operating the PROGRAM button and other buttons, refer to "For IP-PTs" in
"5.7.1 Assigning IP Addressing Information
".
• To confirm the connection to the secondary PBX after assigning IP addressing information, (1) turn
the IP-PT’s power off, and (2) hold the STORE button and 2 key while turning the power on.
Installation Manual 225
5.7.1 Assigning IP Addressing Information