3-8 User Programming (Manager Programming)
3.2 User Programming (Manager Programming)
Date and Time Set (contd.)
000
11. Press NEXT.
Display example: 12:00 AM
12. Enter the hour.
To change the current entry, press CLEAR and the new hour.
13. Press .
14. Enter the minute.
To change the current entry, press CLEAR and the new minutes.
15. Press STORE.
16. Press END.
Conditions • After changing an entry, you can press STORE. You do not have to
perform all of the rest of the steps.
• To go back to the previous field, press at steps 4 through 9 and
steps 13 through 14.
• If you hear the alarm after pressing STORE, check that the date is
valid.
• The clock starts immediately after the STORE button is pressed.
• You cannot leave the entry empty.
• The time is adjusted automatically, if the first outgoing call is made
after three o’clock each morning.
Feature References Display, Time and Date (→ Installation Manual)
To Next Page
Loading...
