Panasonic KX-TD816E - Page 117

4-8 DPT Features
A 4.2 DPT Features
0
4. Hang up or press the SP-PHONE/MONITOR button.
Cancelling
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (750) and 0.
• You hear confirmation tone and then dial tone.
• The display shows:
3. Hang up or press the SP-PHONE/MONITOR button.
Conditions
• The selected message is displayed every time you go off-hook.
• Regarding Message 3;
1) If the extension number you want to dial has more than three characters, refer to
System Programming to change the setting.
2) If the extension number you want to dial has less than three characters, dial “ ”
or “#” to make it up to three characters.
• A maximum of seven parameters (“%” characters) can be stored per message. You
can enter
“0 through 9,” “ ” and “#” for the parameters.
• With the KX-T7235, KX-T7431, KX-T7433 and KX-T7436, you can execute this
feature with the display operation.
Programming References
• System Programming — Installation Manual
[008] Absent Messages
[990] System Additional Information, Field (34)
Feature References
System Feature Access Menu (4.4/Special Display Features)
4
Message Cancel
1
2
3
7
5
0