4-14 DPT Features
A 4.2 DPT Features
• If the party you are calling is using a single line telephone (SLT), only Ring-Calling
mode is available.
Programming References
• Station Programming (Section 2)
Intercom Alerting Assignment
Feature References
Handsfree Answerback
Answering, Direct CO Line
Allows you to answer an outside call by pressing a CO button; you do not have to lift
the handset or press the SP-PHONE/MONITOR button.
To answer an incoming outside call
1. Press the CO button which is flashing red rapidly.
• The indicator light turns green and handsfree conversation
is established.
Conditions
• Just specify the line that is to be connected when multiple incoming outside calls
arrive at the same time.
• There are three types of CO buttons: Group-CO (G-CO) button, Loop-CO (L-CO)
button and Single-CO (S-CO) button. These can be assigned on flexible buttons by
Station Programming.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment— Group-CO (G-CO) button, Loop-CO (L-CO) button,
Single-CO (S-CO) button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
Preferred Line Assignment — Incoming
Feature References
Handsfree Operation
1
To Next Page
Loading...
