5-6 DECT Portable Station Features
5.1 DECT Portable Station Overview
After setting the power switch to ON, one of the following displays may appear.
The portable station is in the Stand-by mode.
The date and time (day / month / time) are displayed on the top line.
You can select displaying the date only (day / month) in PS
Programming. (Selecting the Date / Time Display)
The number which is determined in PS Programming (e.g., your exten-
sion number) can be displayed on the bottom line. (Selecting the
Standby Display; default – Off)
Consult with your dealer.
The Call Forwarding feature has been set.
The Do Not Disturb (DND) feature has been set.
The key lock mode has been set to ON. To cancel the mode, press
(Function) for 2 seconds.
Your PS is not registered in the system.
Your PS is out of range.
Programming References
• PS Programming (Section 5.3)
PS Programming Item Description — Selecting the Standby Display
Selecting the Date / Time Display
Feature References
Key Lock Setting (5.2/DECT Portable Station Features)
1 JAN 13:00
FAULT
FWD
DND
KEYPAD LOCKED
PRESS F FOR 2SEC
REGISTER UNIT
NO SERVICE
To Next Page
Loading...
