Panasonic KX-TD816E - 5.2 DECT Portable Station Features

DECT Portable Station Features 5-11
5.2 DECT Portable Station Features
Basic Operations
Making Intercom Calls
Make sure the Power Switch is set to ON (●) and “ ” is displayed.
1. Press (Talk) or (Intercom).
2. Enter the
extension number.
• The dialled number is displayed.
• If you misdial, press (Flash) and enter the
number again.
3. Talk after the called party answers.
4. Press (Cancel) after the conversation is finished.
Conditions
• Predialling is also possible. In this case, reverse steps 1 and 2.
• If you misdial while predialling, press (Clear) to clear a digit from the left, and
enter the number again.
• You can also finish the conversation by placing the PS on the charger or
pressing (Talk).
• If “ ” flashes, move towards the Cell Station and try again.
CLR
C
INT'
Handover: Even if you move during a conversation, the linking CS will automatically
switch without disconnecting the call.
Handover is available only during a conversation (except a conference call).
It is not available when a switched CS is busy or there is no CS in the
new range.
201
201