5-12 DECT Portable Station Features
5.2 DECT Portable Station Features
Making Outside Calls
There are three types of line access methods as follows:
1) Line Access, Automatic: selects an idle CO line.
2) Line Access, CO Line Group: selects an idle CO line in the desired CO line group.
3) Line Access, Individual: selects a specific CO line.
Line Access, Automatic / CO line group
Make sure the Power Switch is set to ON (●) and “ ” is displayed.
1. Press (Talk).
2. Enter the line access code.
– 9: Automatic
– 81 through 88: CO Line Group
3. Enter the phone number.
• The dialled number is displayed.
• The display starts counting the call duration (or
charge, if programmed).
• If you misdial, press (Flash) and enter the
number again.
4. Talk after the called party answers.
5. Press (Cancel) after the conversation is finished.
Conditions
• Predialling is also possible. In this case, press (Talk) (step 1) after entering the
phone number (steps 2 and 3).
• You can also finish the conversation by placing the PS on the charger or
pressing (Talk).
• If “ ” flashes, move towards the Cell Station and try again.
To Next Page
Loading...
