DECT Portable Station Features 5-13
5.2 DECT Portable Station Features
Line Access, Individual
Make sure the Power Switch is set to ON (●) and “ ” is displayed.
1. Press (Flexible CO).
2. Enter the phone number.
• The dialled number is displayed.
• The display starts counting the call duration (or
charge, if programmed).
• If you misdial, press (Flash) and enter the
number again.
3. Talk after the called party answers.
4. Press (Cancel) after the conversation.
Conditions
• Predialling is also possible. In this case, reverse steps 1 and 2.
• You can also finish the conversation by placing the PS on the charger or
pressing (Talk).
• If “ ” flashes, move towards the Cell Station and try again.
To Next Page
Loading...
