Panasonic KX-TD816E - Page 347

5-56 DECT Portable Station Features
5.4 PBX Programming
PBX Programming Operations
To execute PBX Programming, you need to switch your PS to the PBX Programming
mode.
To enter the PBX Programming mode
Make sure the Power Switch is set to ON (●) and “ ” is displayed.
1. Press (Function).
2. Press (Book) 2 times.
• You can also search by pressing (Next) or
(Previous).
3. Press (OK).
4. Press (Book).
• You can also search by pressing (Next) or
(Previous).
5. Press (OK).
• The (Intercom) flashes green.
To exit from the PBX Programming mode
1. Press (Cancel).
Conditions
• For more details about these programs, please
refer to the corresponding programs in
Section 2.2, “Station Programming.” The fol-
lowing PS buttons replace the buttons on a
proprietary telephone (PT).
C
INT'
OK
OK
KEY
PROGRAMMING
PS-PROGRAM
PBX-PROGRAM
SEL (S1) = (Book)
CLR (S2) = (Clear)
NEXT (S3) = Not available.
PREV = (Redial)
STORE = (OK)
END = (Hold)
OK
CLR
PT Button PS Button