Panasonic KX-TD816E - Page 348

DECT Portable Station Features 5-57
5.4 PBX Programming
■ Charge Fee Reference
— Extension Charge Fee Reference
Provides you with a display of each extension
charge.
• Enter the programming mode.
• Dial 8.
• Enter the ID Code.
• Dial 1 + extension number.
• Press the Book button.
• Press the Clear or OK button, if required.
- Clear: To clear the meter and charge
- OK: To print out the total meter and charge
• Press the Hold (END) button three times.
• Exit the programming mode.
— CO Line Charge Fee Reference
Provides you with a display of each CO line
charge.
• Enter the programming mode.
• Dial 8.
• Enter the ID code.
• Dial 2.
• Dial the CO line number as follows.
- 01 - 08 : if connected to a KX-TD816
- 01 - 24 : if connected to a KX-TD1232
• Press the Book button.
• Press the Clear or OK button, if required.
- Clear: To clear the meter and charge
- OK: To print out the total meter and charge
• Press the Hold (END) button three times.
• Exit the programming mode.
— Account Code Charge Fee Reference
Provides you with a display of each account
code charge.
• Enter the programming mode.
• Dial 8.
• Enter the ID Code.
• Dial 3 + location number (01 through 40).
• Press the Book button.
• Press the Clear or OK button, if required.
- Clear: To clear the meter and charge
- OK: To print out the total meter and charge
• Press the Hold (END) button three times.
• Exit the programming mode.
— Total Extension Charge Fee Reference
Provides you with a display of the total exten-
sion charge.
• Enter the programming mode.
• Dial 8.
• Enter the ID Code.
• Dial 4.
• Press the Book button.
• Press the Clear or OK button, if required.
- Clear: To clear the total meter and charge
- OK:
To print out the total meter and charge of
all extension numbers, and the individual
charges for each extension number
• Press the Hold (END) button twice.
• Exit the programming mode.
— Total CO Line Charge Fee Reference
Provides you with a display of the total CO line
charge.
• Enter the programming mode.
• Dial 8.
• Enter the ID Code.
• Dial 5.
• Press the Book button.
• Press the Clear or OK button, if required.
- Clear: To clear the total meter and charge
- OK:
To print out the total meter and charge of
all CO line numbers, and the individual
charges for each CO line number
• Press the Hold (END) button twice.
• Exit the programming mode.