Panasonic KX-TD816E - Page 349

5-58 DECT Portable Station Features
5.4 PBX Programming
— Total Account Code Charge Fee Reference
Provides you with a display of the total account
code charge.
• Enter the programming mode.
• Dial 8.
• Enter the ID Code.
• Dial 6.
• Press the Book button.
• Press the Clear or OK button, if required.
- Clear: To clear the total meter and charge
- OK:
To print out the total meter and charge of
all account codes, and the individual
charges for each account code
• Press the Hold (END) button twice.
• Exit the programming mode.
— Account Code Set
You can assign an account code.
• Enter the programming mode.
• Dial 8.
• Enter the ID Code.
• Dial 7 + location number (01 through 40).
• Press the Clear button.
• Enter the new account code (5 digits).
• Press the OK button.
• Press the Hold (END) button twice.
• Exit the programming mode.
■ Flexible Button Assignment
Each Flexible CO button on your PS can be
assigned as a feature button as follows.
— Account Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 6.
• Press the Book button.
• Exit the programming mode.
— Conference Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 7.
• Press the Book button.
• Exit the programming mode.
— DSS Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 1 + extension number.
• Press the Book button.
• Exit the programming mode.
— FWD/DND Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 4.
• Press the Book button.
• Exit the programming mode.
— Group-CO (G-CO) Button
• Enter the programming mode.
• Press the desired Flexible CO button.
•
Dial # + CO line group number (1 through 8).
• Press the Book button.
• Exit the programming mode.
— Log-In/Log-Out Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 80.
• Press the Book button.
• Exit the programming mode.
— Loop-CO (L-CO) Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial .
• Press the Book button.
• Exit the programming mode.
— Message Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 3.
• Press the Book button.
• Exit the programming mode.
— One-Touch Dialling Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 2 + desired number.
• Press the Book button.
• Exit the programming mode.