Panasonic KX-TD816E - Page 350

DECT Portable Station Features 5-59
5.4 PBX Programming
†: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports digital proprietary telephone integration; e.g. KX-TVP100).
— One-Touch Dialling with Auto Hold Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 8#.
• Dial the desired number.
• Press the Book button.
• Exit the programming mode.
— Save Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 5.
• Press the Book button.
• Exit the programming mode.
— Single-CO (S-CO) Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 0.
• Dial the CO line number as follows.
- 01 - 08 : if connected to a KX-TD816
- 01 - 24 : if connected to a KX-TD1232
• Press the Book button.
• Exit the programming mode.
— Terminate Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 9.
• Press the Book button.
• Exit the programming mode.
— Two-Way Record Button†
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 83 + the Voice Mail extension number.
• Press the Book button.
• Exit the programming mode.
— Two-Way Transfer Button†
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 84 + the Voice Mail extension number.
• Press the Book button.
• Exit the programming mode.
— Voice Mail (VM) Transfer Button
• Enter the programming mode.
• Press the desired Flexible CO button.
• Dial 82 + the Voice Mail extension number.
• Press the Book button.
• Exit the programming mode.
■ Preferred Line Assignment — Outgoing
You can select the desired outgoing line prefer-
ence. When you go off-hook, you can be con-
nected to no line, an idle line, a pre-assigned
line or INTERCOM line.
• Enter the programming mode.
• Dial 1.
• Dial 1, 2, 3 + CO line number, or press the
INTERCOM button.
- 1 : No Line Preference
- 2 : Idle Line Preference
- 3 + CO line number: Prime Line (CO
Line) Preference
- INTERCOM: Prime Line (INTERCOM)
Preference
• Press the Book button.
• Exit the programming mode.
■ Self-Extension Number Confirmation
• Enter the programming mode.
• Dial 6.
• Press the Hold (END) button.
• Exit the programming mode.
■ Station Programming Data Default Set
• Enter the programming mode.
• Dial #.
• Press the Book button.
• Exit the programming mode.