SLT and ISDN Telephone Features 7-7
7.2 SLT and ISDN Telephone Features A
2
3
parameters
4
(X: 7 through 9)
2. Dial the feature number (750) and a desired message
number (7 through 9).
3. Enter the parameters (extension number, time, day/month,
etc.), if required.
• You hear a confirmation tone and then a dial tone.
4. Hang up.
Cancelling
1. Lift the handset.
2. Dial the feature number (750) and 0.
• You hear a confirmation tone and then a dial tone.
3. Hang up.
Conditions
• Regarding Message 3;
1) If the extension number you want to dial has more than three characters, refer to
System Programming to change the setting.
2) If the extension number you want to dial has less than three characters, dial “ ”
or “#” to make it up to three characters.
• A maximum of seven parameters (“%” characters) can be stored per message. You
can enter “0 through 9,” “ ” and “#” for the parameters.
Programming References
• System Programming — Installation Manual
[008] Absent Messages
1
2
3
To Next Page
Loading...
