SLT and ISDN Telephone Features 7-9
7.2 SLT and ISDN Telephone Features A
• In Option mode, it is possible to record a calling or called party’s account code in the
SMDR.
• It is not possible to enter an account code while having a conversation or hearing
reorder tone.
• There is no need for an account code entry when receiving incoming calls.
• Dialling “ ” while entering an account code allows you to clear the number and re-
enter.
• Pressing the Register Recall button while entering an account code cancels the entry.
• An account code can be up to five numeric digits (0 through 9). After entering an
account code, the delimiter “#” or “99” must be entered (the entered account code
should not be “99” nor end with “9”).
• An account code can be stored into Memory Dialling (“Pickup Dialling (Hot Line),”
“System/Station Speed Dialling,” “Call Forwarding — to CO Line”). The sequence
to enter an account code into Memory Dialling is:
— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]
or
— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]
• If an entered account code does not match a stored account code when making an
outside call, a reorder tone is returned.
• If an entered account code matches a pre-assigned account code when making an
outside call, the charge fee of the account code is totalized.
• If you use an account code which is for a private call, the phone number of the
destination is not recorded on SMDR.
Programming References
• Station Programming (Section 2)
Charge Fee Reference — Account Code Charge Fee Reference, Account Code Set
• System Programming — Installation Manual
[105] Account Codes
[508] Account Code Entry Mode
[601] Class of Service
Feature References
Station Message Detail Recording (SMDR) (→ see Installation Manual)
Toll Restriction Override by Account Code Entry
* Class of Service (COS) is used to define the features which are allowed for a group of extension.
Refer to the Installation Manual for programming and more details.
To Next Page
Loading...
